victronups - Driver for IMV/Victron UPS unit Match, Match Lite, NetUps
NOTE
This man page only documents the hardware(hyspecific features of the the
victronups driver. For information about the core driver, see
nutupsdrv(8) .
SUPPORTED HARDWARE
victronups should recognize all Victron models that use a serial protocol at
1200 bps. These include Match Lite, Match and the NetUps line.
The Match Lite line may only report a handful of variables. This is
usually not a bug (hy they just don't support anything else.
CABLING
If your Victron cable is broken or missing, use this diagram to build
a clone:
docs/cables/victron.txt
EXTRA ARGUMENTS
This driver supports the following optional setting in the
ups.conf(5) :
"modelname=<name>"
Set model name
"usd=delay"
Set delay before shutdown on UPS
BUGS
The protocol for this UPS is not officially documented.
AUTHOR
Radek Benedikt <benedikt@lphard.cz>,
Daniel Prynych <Daniel.Prynych@hornet.cz
SEE ALSO
The core driver:nutupsdrv(8) Internet resources: The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
