vgcreate creates a new volume group called
VolumeGroupName using the block special device
PhysicalVolumePath previously configured for LVM with
pvcreate(8) .
OPTIONS
See lvm for common options.
-l ", " --maxlogicalvolumes " " MaxLogicalVolumes
Sets the maximum number of logical volumes allowed in this
volume group.
The setting can be changed with vgchange.
For volume groups with metadata in lvm1 format, the limit
and default value is 255.
If the metadata uses lvm2 format, the default value is 0
which removes this restriction: there is then no limit.
Sets the maximum number of physical volumes that can belong
to this volume group.
The setting can be changed with vgchange.
For volume groups with metadata in lvm1 format, the limit
and default value is 255.
If the metadata uses lvm2 format, the default value is 0
which removes this restriction: there is then no limit.
If you have a large number of physical volumes in
a volume group with metadata in lvm2 format,
for tool performance reasons, you should consider
some use of --metadatacopies 0
as described in pvcreate(8) .
Sets the physical extent size on physical volumes of this volume group.
A size suffix (k for kilobytes up to t for terabytes) is optional, megabytes
is the default if no suffix is present. Values can be from 8 KB to 16 GB in
powers of 2. The default is 4 MB.
Once this value has been set, it is difficult to change it without recreating
the volume group which would involve backing up and restoring data on any
logical volumes.
If the volume group metadata uses lvm1 format, there is a limit of 65534
extents in each logical volume, so the default of 4 MB leads to a maximum
logical volume size of around 256GB.
If the volume group metadata uses lvm2 format there is no such restriction,
although having a large number of extents will slow down
the tools but have no impact on I/O performance to the logical volume.
The 2.4 kernel has a limitation of 2TB per block device.
EXAMPLES
To create a volume group named
test_vg using physical volumes
/dev/hdk1 ", and " /dev/hdl1 with default physical extent size of 4MB:
