safenet - Driver for SafeNet compatible UPS equipment
NOTE
This man page only documents the hardware(hyspecific features of the
safenet driver. For information about the core driver, see
nutupsdrv(8) .
SUPPORTED HARDWARE
This driver supports UPS equipment which can be controlled via
SafeNet v1.0 for Windows (serial interface only).
EXTRA ARGUMENTS
This driver supports the following optional settings in the
ups.conf(5) :
"manufacturer=value"
Autodetection of this parameter is not possible yet (and it probably
never will be). Therefor this user defined string accepts any name. The
default is unknown.
"modelname=value"
Like manufacturer above. The default is unknown.
"serialnumber=value"
Like manufacturer above. The default is unknown.
UPSCMD
test.battery.start (hy Start UPS self test
test.battery.stop (hy Cancel UPS self test
test.failure.start (hy Start simulated power failure
test.failure.stop (hy Cancel simulated power failure
beeper.on (hy Enable UPS beeper
beeper.off (hy Disable UPS beeper
shutdown.return (hy Shut down in 1 second and wait for power to return
shutdown.reboot (hy Shut down in 1 seconds and reboot after 1 minute
shutdown.reboot.graceful (hy Shut down in 20 seconds and reboot after 1 minute
AUTHOR
Arjen de Korte <arjen@de(hykorte.org>
SEE ALSO
The core driver:nutupsdrv(8) Internet resources: The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
