capiinit (8) manpage
- NAME
capiinit - start or stop CAPI-capable ISDN cards
- SYNOPSIS
capiinit [OPTIONS] start | stop | show | status | prepare | reload | activate | deactivate
capiinit [OPTIONS] activate|deactivate cardname
capiinit [OPTIONS] activate|deactivate driver [cardname]
- DESCRIPTION
capiinit is called with one of the following actions:
- start
- Load all modules and initialize all cards (loading the firmware), which are
configured in /etc/isdn/capi.conf.
- stop
- Reset all cards and unload modules.
- show
- Show the current configuration.
- status
- Show the current status.
- prepare
- Load all modules.
- activate
- Initialize all cards.
- activate cardname
- Initialize one card (i.e.: c4-ec00).
- activate driver [cardnumber]
- Initialize one card.
- deactivate
- Reset all cards.
- deactivate cardname
- Reset one card (i.e.: c4-ec00).
- deactivate driver [cardnumber]
- Reset one card.
- reload
- Reset all cards and initialize them again.
Firmware files are searched in this order in the following directories:
/usr/share/isdn/`uname -r`,
/usr/share/isdn,
/usr/lib/isdn,
/lib/isdn.
There is a sample config in /etc/isdn/capi.conf.
- OPTIONS
- -c filename, --config filename
- Use filename as config file (default is /etc/isdn/capi.conf).
- -d, --debug
- Save patch values for debugging purposes.
- -s, --silent
- Don't show status information.
- AUTHOR
Manpage written from C source by Paul Slootman <paul@debian.org>, updated
by Matthias Klose <m@klose.in-berlin.de>.
|
