3C515-DIAG (8) manpage
- NAME
3c515-diag - setup and diagnostic program for the 3Com 3c515 Ethernet cards.
- SYNOPSIS
- DESCRIPTION
3c515-diag is a program that you can use to diagnose problems with
3Com 3c515 ethercards as well as reconfiguring it.
- OPTIONS
These programs follow the usual GNU command line syntax, with long
options starting with two dashes (`-').
A summary of options is included below.
- -h, --help
- Show summary of options.
- -V, --version
- Show version of program.
- -v, --verbose
- Verbose mode.
- -q, --quiet
- Be very unverbose.
- -a, --all
- Print all registers.
- -p, --base-address <port>
- Specify port to use. Valid values are: 0x240, 0x280, 0x300, 0x320, 0x340, 0x360
- -f, --interface <interface>
- Interface number. Valid Options are: 10baseT, 10base2, and 10Mbs AUI.
- -Q, -i, --irq <irq>
- Specify new interrupt. Valid values are: 3-5,7,9-15.
- -w, --write-EEPROM <values>
- Write to the EEPROMS with the specified values.
- SEE ALSO
- AUTHOR
This manual page was written by Alain Schroeder <alain@debian.org>,
for the Debian GNU/Linux system (but may be used by others).
|
