• NAME
  
  sane-nec - SANE backend for NEC scanners
• DESCRIPTION
  
  The sane-nec library implements a SANE (Scanner Access Now Easy) backend that provides access to NEC SCSI scanners.  This backend should be considered alpha-quality software!  In the current state it is known to work with PC-IN500/4C scanners. Another MultiReader scanner series is not supported. PC-IN 500/4C and MultiReader scanner are only sold in Japan.(except Multi Reader PetiScan.)
  For other scanners, it may or may not work.
  
  The backend has the following known problems:
  - ColorLineart mode is not supported.
  - device name is fixed to /dev/scanner
  
  
  At present, the following scanners are known to work with this backend.

  
  Vendor Product id
  ------ -----------
  NEC    PC-IN500/4C
  

  
  
• FILES
  

  /etc/sane.d/nec.conf

  The backend configuration file.

  /usr/lib/sane/libsane-nec.a

  The static library implementing this backend.

  /usr/lib/sane/libsane-nec.so

  The shared library implementing this backend (present on systems that support dynamic loading).

• ENVIRONMENT
  

  SANE_DEBUG_NEC

  If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend.  E.g., a value of 128 requests all debug output to be printed.  Smaller levels reduce verbosity.

• SEE ALSO
  
  sane(7) , sane-scsi(5)
• AUTHORS
  
  Kazuya Fukuda

Current Users: 57 © 1999-2009 PenguinSoft. All trademarks and copyrights on this page are owned by their respective companies. Linux is a trademark of Linus Torvalds.