xirc2ps_cs is the low-level Card Services driver for the Xircom
16-bit PCMCIA ethernet adapters. When this driver is attached to a
card, it allocates the next available ethernet device.
PARAMETERS
pc_debug= n
Selects the PCMCIA debugging level. This parameter is only available
if the module is compiled with debugging enabled. A non-zero value
enables debugging.
if_port= n
Selects the transceiver type, for some CE3B-100 cards that lack the
ability to autonegotiate. For such cards, a value of 1 selects
10baseT, and 4 selects 100baseT.
full_duplex= n
Selects full duplex mode. The default is 0 (half duplex).
irq_list= i,j,...
Specifies the set of interrupts that may be allocated by this driver.
lockup_hack= n
Enables a hack to avoid lockups on some cards. Use this only if you
really have lockup problems with your card.
