• NAME
  
  fpit - Fujitsu Stylistic input driver
• SYNOPSIS
  

  
   "Section qInputDeviceq"
     Identifier \*q idevname q
       Driver \*qfpit\*q     Option \*qDevice\*q   \*q devpath q   ...
  
  
    EndSection 

• DESCRIPTION
  
  fpit is an Xorg input driver for Fujitsu Stylistic Tablet PCs.
  
  
  
  The
  fpit driver functions as a pointer input device, and may be used as the
  X server's core pointer.
  
• SUPPORTED HARDWARE
  
  This driver supports the touchscreen of the Stylistic LT and (with
  special options) of the Stylistic 500, 1000, 1200, 2300, and 3400.
  Modern FinePoint MP800 devices will also work with this driver.
  
  Under Linux the Fujitsu's serial port is not, by default, detected.
  Therefore the port must be configured manually as described in the
  accompanying readme.txt file.
  
  For example, add the following to your startup scripts for Stylistic xx00
  devices:
  
  

  setserial /dev/ttyS3 autoconfig

  setserial /dev/ttyS3 IRQ 15 baud_base 115200 port 0xfce8

  
  
  
  This driver now supports Stylistic 3400 (and possibly other passive-pen
  systems) with a special "Passive" paramter. Try this serial
  configuration for the 3400:
  
  

  setserial /dev/ttyS3 autoconfig

  setserial /dev/ttyS3 uart 16450 irq 5 port 0xfd68

  
  

• CONFIGURATION DETAILS
  
  Please refer to xorg.conf(5x) for general configuration
  details and for options that can be used with all input drivers.  This
  section only covers configuration details specific to this driver.
  
  
  
  The device supports the following options:
  

  Option MaximumXPosition\fP \fInumber

  Sets the maximum X position, use this to calibrate your touchscreen's
  right hand edge.
  

  Option MinimumXPosition\fP \fInumber

  Sets the minimum X position, use this to calibrate your touchscreen's
  left hand edge.
  

  Option MaximumYPosition\fP \fInumber

  Option MinimumYPosition\fP \fInumber

  Same as for X axis, but for Y axis.
  

  Option InvertX

  Option InvertY

  Invert the specified axis.
  

  Option SwapXY

  Swap the X and Y axis (after inversions).
  

  Option Rotate\fP \fICW

  Option Rotate\fP \fICWW Manipulate the invert and swap options to match screen
  rotations. (Will behave strangely if combined with invert or swap options.)
  New users should consider the "TrackRandR" option instead.
  

  Option DeviceName\fP \fIname

  Option DeviceName\fP \fIname sets the name of the X device.
  

  Option AlwaysCore\fP \fIon

  enables the sharing of the core pointer. When this feature is enabled, the
  device will take control of the core pointer (and thus will emit core events)
  and at the same time will be able, when asked so, to report extended events.
  You can use the last available integer feedback to control this feature. When
  the value of the feedback is zero, the feature is disabled. The feature is
  enabled for any other value.
  

  Option DebugLevel number

  sets the level of debugging info reported.
  

  Option BaudRate\fP \fI38400\fP, \fI19200\fP (default) or \fI9600

  changes the serial link speed.
  

  Option Passive

  decodes the passive pen.
  Option TrackRandR automatically keeps the cursor synchronized with the pen's position, even when
  the screen is resized or rotated. (Recommended for tablet PC's.)
  

  
  Example, for Stylistic LT setup is:
  

  
   "Section qInputDeviceq"
     Identifier \*q mouse0 q
       Driver \*qfpit\*q     Option \*qDevice\*q   \*q/dev/ttyS3 q     # Option \*qTrackRandR\*q   EndSection 
  
  
  And for other Stylistic devices try:
  
  
  
   "Section qInputDeviceq"
     Identifier \*q mouse0 q
       Driver \*qfpit\*q     Option \*qDevice\*q   \*q/dev/ttyS3 q     Option \*qBaudRate\*q \*q19200 q     Option \*qMaximumXPosition\*q \*q6250 q     Option \*qMaximumYPosition\*q \*q4950 q     Option \*qMinimumXPosition\*q \*q130 q     Option \*qMinimumYPosition\*q \*q0 q     Option \*qInvertY\*q     # Option \*qTrackRandR\*q   EndSection 
  
  
  For Stylistic 3400:
  
  
  
   "Section qInputDeviceq"
     Identifier \*q mouse0 q
       Driver \*qfpit\*q     Option \*qDevice\*q   \*q/dev/ttyS3 q     Option \*qBaudRate\*q \*q9600 q     Option \*qMaximumXPosition\*q \*q4070 q     Option \*qMaximumYPosition\*q \*q4020 q     Option \*qMinimumXPosition\*q \*q0 q     Option \*qMinimumYPosition\*q \*q0 q     Option \*qPassive\*q     Option \*qSendCoreEvents\*q     # Option \*qTrackRandR\*q   EndSection 
  
  
    

• SEE ALSO
  
  Xorg(1) , xorg.conf(5) , Xserver(1) , X(7) .
  
• AUTHORS
  
  Original FPIT port:
  Rob Tsuk <rob@tsuk.com> and John Apfelbaum <johnapf@linuxslate.com>
  
  X4 Port: Richard Miller-Smith <richard.miller-smith@philips.com>,
  based on Elographics code from: Patrick Lecoanet
  
  X4.2 Cleanup: Alan Cox
  

Current Users: 167 © 1999-2009 PenguinSoft. All trademarks and copyrights on this page are owned by their respective companies. Linux is a trademark of Linus Torvalds.